<%@LANGUAGE="VBSCRIPT" CODEPAGE="65001"%> CHINAHANJI Power Co., LTD - Pistone, ugelli, valvole | pompa di iniezione del combustibile | Pompa diesel | sistema di alimentazione | Pencil Nozzle
  

 
Informazioni sul prodotto
  AMBAC Series
  VE pompa
  Series Delphi-Lucas
  Stanadyne
  Caterpillar
  VP Series
  HEUI Injector
  Ugello Holders
  Cummins Series
  Detroit serie
  Yanmar
  Pompa
  Electronic Control
  Common Rail systeem
  Stantuffo
  Ugello
  Delivery Valve
  Motore grafico
  Repair Tool Kit &
  Gas-iniezione
  Turbo
  Standard Injector
     
  eBay StoreseBay Stores  
www.chinahanji.com
 

HOME >> Standard Injector >> Standard Oil Injection
 
 
 
 
Oil nozzle checkers
  NT-1 oil nozzle checkers are used primarily for checking various oil injectors and oil nozzles, concerning the start pressure of oil injectors (60Mpa maximum), the sealing performance of oil nozzles, spraying shapes, and sealing performance of oil injectors.
Our oil nozzle checkers are tested to comply with international standards ISO8984/1.
Oil nozzle checker Standard oil injectors
Standard oil ducts Oil injector components
Standard oil injectors
  Standard oil injectors are essential for injection pump test-beds and are used primarily for testing and adjusting diesel engine injection pumps. Test accuracy is vital for the oil feed performance of injection pumps and basically ties in with the operating power and economy of diesel engines.
Standard oil injector (orifice-plate type) Standard oil injector (low-inertia)
 
Standard oil injector (shaft needle type)  
Standard oil injectors are produced according to international standards ISO7440.
1. Standard oil injectors (low-inertia and orifice-plate type)
Catalogue:
ISO7440B64-20.7 (BOSCH NO:1 688 901 101)，
ISO7440B64-25.0 (BOSCH NO:1 688 901 102)，
ISO7440B74-20.7 (BOSCH NO:1 688 901 103)，
ISO7440B74-25.0 (BOSCH NO:1 688 901 104)，
ISO7440B84-20.7 (BOSCH NO:1 688 901 105)，
ISO7440B84-25.0 (BOSCH NO:1 688 901 106)，
ISO7440B54-20.7 (BOSCH NO:1 688 901 109)，
ISO7440B54-25.0 (BOSCH NO:1 688 901 110)，
Used primarily for checking and adjusting injection pumps Type PW, PB, PN, PW2000, P7, P7100, BQ, IW, PL, PM
2. Standard oil injectors (orifice-plate type)
Catalogue:
ISO07440A44-20.7 (BOSCH NO:1 688 901 015)，
ISO07440A54-20.7 (BOSCH NO:1 688 901 016)，
ISO07440A64-20.7 (BOSCH NO:1 688 901 017)，
ISO07440A74-20.7 (BOSCH NO:1 688 901 018)，
ISO07440A84-20.7 (BOSCH NO:1 688 901 019)，
ISO07440A64-17.2 (BOSCH NO:1 688 901 020)，
Used primarily for checking and adjusting injection pumps Type A, I, B, Z, VE, IW
3. Standard oil injectors (shaft needle type)
Catalogue:
ISO7440A14-17.2 (BOSCH NO:0 681 343 009)，
ISO7440A14-14.7 (BOSCH NO:1 688 901 000)，
Used primarily for checking and adjusting injection pumps Type I, II, B, A
4. Standard oil nozzles (accessories)
Standard oil nozzles (shaft needle type) are use for oil injectors (shaft needle type). Our DN12SD12 standard oil nozzles are produced according to ISO4010 standards, applicable for the oil feeding capacity≤150mm? Cycle.
 
 
English China Español Русско Portuguese العربية Nederlands Français Deutsch Ελληνικά Italiano 日本語
闽ICP备06000674号
E-mail:sales@vepump.com　Fax:+86-594-3600560
CopyRight©2003 ChinahanJi Power Co.,Ltd All rights reserved
   
CHINAHANJI POWER Co., Ltd. è un'azienda specializzata produzione di energia elettrica del motore diesel parti produttore. I nostri prodotti principali includono pompe VE, parti iniettori di carburante diesel, ugelli, sistemi di iniezione di carburante e altri prodotti connessi (come ad esempio la testa della pompa, pompa a palette, camma, albero rotante, in valvole batteria olio, ecc), colonna plug (tipo A, AS-tipo, P-tipo, PS7100-tipo, P8500-tipo, di tipo MO, ecc), ugello (DN, DNOPDN, S, SN, PN, ecc), la consegna della valvola, matita di Carter-ugello tipo e così via.